Non-Vented Tables

Our Non-Vented series tables are designed to provide a workstation for animal necropsies, surgeries, and dissections where exposure to fumes and odors in not a concern but durability and clean ability are required.

Designed for use in any size lab, all units can be equipped with a wide variety of optional features which enable it to be customized to your exact needs.

Model	Air Removal	Vented Area (in.)		Overall Dimensions			Add to Quote what's this?
		W	L	W	L	H
24, 30 & 36 Series
28-60 NVNT	NA	-	-	28	60	36
30-48 NVNT	NA	-	-	30	48	30
36-60 NVNT	NA	-	-	36	60	36

Standard Design and Construction

The table shall utilize Type 316 stainless-steel construction for all welded-wetted sink and drain pan components. All welds shall be heliarc. All exposed welds shall be ground to a seamless polished finish. The table shall utilize 18 gauge T316 stainless-steel, removable, perforated, work surface panels. The panels shall be recessed 1/4” below the table perimeter to prevent fluids from escaping the work area. Solid surface models are available. The table shall utilize a stainless-steel, precision, engineered, removable, internal baffling system to create a uniform downdraft air velocity across the entire perforated work surface.

The table drain pan shall be sloped to one end, under the exhaust plenum, for complete drainage and shall be designed for ease in cleanability to prevent buildup of debris and bacteria.

The table can be factory pre-plumbed and pre-wired ready for single-point connection of utilities on site.

The table is manufactured in the United States and utilize American-made components where applicable.

Options & Accessories

Please refer to the specifications for list of each tables included accessories. Other options that can be included on the table are:

• Sink & Faucet

• Insinkorator Disposer

• Thermoplastic cutting board, 1/2" x 12" x 18"

• Ground fault circuit interrupter (GFCI) receptacle (1) HP heavy duty disposer

• Eye wash hose/spray assembly

• 3.5 diopter fluorescent magnifier

• Surgical Lighting

• Gas Outlets

• ANSI Approved deck mounted eye wash

• Fixed height in lieu of elevating height

• Flexible neoprene exhaust bellows for elevating height option

• Air velocity monitor

• Halogen task lamp with magnifier

• Formalin collection carboy with quick disconnect

• Hand spray assembly

The above specifications are generic and are subject to change. Our tables can be custom made to fit your needs. Please refer to all quotations, drawings and submittals for specific models.

Non-Vented Tables

24, 30 & 36 Series

Standard Design and Construction

Options & Accessories

The above specifications are generic and are subject to change. Our tables can be custom made to fit your needs. Please refer to all quotations, drawings and submittals for specific models.