Disposer Features

• The units are designed to capture dust from the area around the scrapping grid. Capture ability will be dependent on volume and static pressure of the exhaust system* supporting the station. Desgned within the station shall be air flow baffles to cause air flow to occur around the entire perimeter of the scrapping grid area.

• A damper shall be built into the table to allow air flow rates to be fully controlled.

• A filter shall be provided in the exhaust duct and shall be easily removable by operator.

• The exhaust from the station shall be drawn from around the entire perimeter of the scrapping grids.

• *The negative air pressure exhaust system shall be supplied and installed by others.

Construction

• Station Supports - 16 GA stainless-steel tubing
• Station Body - 16 GA stainless-steel
• Scrapping Grids - 1/4” x 1” stainless-steel
• Damper - 16 GA stainless-steel and round bar