Labconco 6′ Cell Logic Class II Type B2 Biological Safety Cabinet Model 323681002
with Temp-Zone™, UV Lamp, Service Fixture & Vacu-Pass™ Portals
The Labconco Cell Logic Class II Type B2 Biological Safety Cabinet delivers comprehensive personnel, product, and environmental protection for laboratories handling hazardous particulates and biological agents requiring BSL-1 through BSL-4 containment.
Type B2 biosafety cabinets—also known as 100% Exhaust or Total Exhaust BSCs—maintain a minimum average inflow velocity of 100 feet per minute (fpm) through the sash opening and require a dedicated exhaust system with a remote blower. All inflow and downflow air is HEPA-filtered and exhausted from the laboratory, making this cabinet suitable for volatile chemical use as an adjunct to microbiological applications.
Cell Logic Type B2 cabinets are specifically designed for cell research, featuring a modified sash design compatible with microscopy and a Temp-Zone™ temperature-controlled work area to support cell viability during extended procedures.
Airflow & Containment Design
- Cabinet Type: Class II, Type B2 (100% Exhaust)
- Inflow Velocity: Minimum 100 fpm through sash opening
- Airflow Pattern: HEPA-filtered downflow; all air exhausted after filtration
- Air Recirculation: None
- Exhaust Requirement: Dedicated exhaust system with remote blower
Filtration & Safety
- Supply & Exhaust Filters: 99.99+% efficient HEPA
- Optional Filters: 99.999% ULPA or H14 HEPA
- Design: Intrinsically safe negative-pressure cabinet
- Contaminated Air: All air passes through exhaust HEPA prior to discharge
Airflow Control & Monitoring
- Long-life DC Electronically Commutated Motor (ECM)
- BalanceFlow™ plenum for energy efficiency and ultra-quiet operation
- Constant Airflow Profile™ (CAP) airflow monitoring system
- Air-Wave™ Entry System to enhance containment at access opening
- Contain-Air™ negative pressure channel at top of sash
- Integrated airflow sensor displaying inflow and downflow values
Work Area & Construction
- Work Surface: Removable, seamless Type 304 stainless steel, dished with lift-out knobs
- Temp-Zone™ Temperature-Controlled Area:
- Located on left side of work surface
- Size: 10.5″ W × 12.0″ D (27 × 30 cm)
- External water circulator required (not included)
- Interior: Unitized, pressure-tested stainless steel
- Exterior: Optic White epoxy-coated steel
Sash, Visibility & Lighting
- 10° angled, fully closing sash
- 1/4″ tempered safety glass
- Counterbalanced, anti-racking, easy-lift mechanism
- Maximum Sash Opening: 22.5″ (57 cm)
- Viewing Height: 27.0″ (69 cm)
- Bright, glare-free LED lighting up to 180 foot-candles (1937 lux)
- Lighting located outside contaminated work area
Included Standard Features
- UV lamp
- Service fixture (air, vacuum, etc.)
- Right and left Vacu-Pass™ portals
- Curved stainless steel inlet grille with waterfall design
- Reserve-Air™ secondary airflow slots
- Two electrical outlets with flush stainless steel covers and dampened hinges
- Airtight damper with 10″ (25.4 cm) nominal round connection
- Noise level: <67 dBA
- 10′ (3 m) power cord with plug
Optional Packages
- Scope-Ready™ Package
- 7.0″ W × 10.5″ H (18 × 27 cm) sash cutout
- Pure-Vu™ seal with powder-coated steel collar
- Stand-Still™ Isolation Platform required (sold separately)
- Temp-Zone™ Circulator Requirements (not included)
- Flow rate: 0.4–0.5 GPM (1.5–1.9 LPM)
- Typical volume: 6 liters
- Temperature range: 0–50 °C
- Chiller/heater required
Applications
- Cell culture and tissue engineering
- Advanced microbiology and virology
- Microscopy-based biological research
- Work involving volatile chemicals with biological agents
Need Help Choosing a Biological Safety Cabinet?
Selecting the right biosafety cabinet depends on your workflow, biosafety level, lab layout, and certification requirements. Geneva Scientific’s experts can help you compare models, identify accessory options, and ensure the best fit for your needs.
Contact us for a quote
