STM-EL

Model: GSM-85-EL Domestic Adjustable Temp
Exterior Dimensions (WxDxH): 18.8”x 31”x 27.6”
Interior Cylinder (DxL): 16” x 26”
Volume (cu.ft): 3
Temperature: 225°-250°F / 107°-121°C
Programmable Settings: 3

Brochure: GSM-85-E

Description

Applications
*Egonomical, reliable and simple to operate, the versatile
Sterilmatics provide the highest standards of sterilizing
performance in a variety of facilities.

Operation
*The sterilizing cycle is fully automatic with the time, temperature and venting controlled by the microprocessor based digital controller.
*The sterilizing temperature can be set anywhere in a range from 225°F (107°C) and 250°F (121°C).
*Included are three programmable buttons for easy retrieval of desired preset settings.
*There is an on-board data logger/printer that records the time, temperature and pressure for each sterilization cycle.
This data can be stored for future printing or be printed out following each cycle.
*Two exhaust speeds are also available, slow and fast, depending on sterilizing media.

Standard Features
*Automatic temperature control
*Thermometer 180°-300°F (82°-149°C)
*Safety valve
*0-30 lb. steam gauge
*0-60 minute timer
* Low water cut-off
*Thermostatic steam trap
*Signal light
*Flat perforated steam baffle
*Removable pan supports
*Adjustable 4” to 6” bullet feet
*Manual fill

Construction
Cylinder
Sterilizing cylinder will be A.S.M.E. constructed and National Board
Registered 3/16” (4.8mm) thick welded aluminum.
Sterilizer exterior is made of polished stainless steel. Interior dimensions of 16” (406mm) in diameter and 26” (660mm) long with a cubic
content of 5,220 cubic inches (85 liters) and will have a door opening
of 13-1/2” (343mm) wide and 11” (279mm) high.

ModelGSM-85-E / Domestic Fixed Temp
Exterior Dimensions (WxDxH)18.8”x 31”x 27.6”
Interior Cylinder (DxL)16” x 26”
Volume (cu.ft)3
Temperature 225°-250°F
107°-121°C
Programmable Settings3